SMA and SolarEdge Have Left Australia: What Perth Owners Should Do

If you have an SMA or SolarEdge inverter on your Perth home, you may have heard the news. Both brands are pulling out of Australia’s home solar market.

Here’s the good news first. Your system won’t stop working because of this. You don’t need to replace a working inverter. But it’s smart to get a few things in order now, so you’re ready if something goes wrong later.

SMA Inverter

What's happened

Two big inverter brands have stepped back from Australian homes in 2026.

Brand

What changed

Key dates

Support for existing owners

SMA

Leaving the home and business solar market to focus on large-scale projects

Announced earlier in 2026

No local details published that we could verify

SolarEdge

Closing local sales and operations in Australia and New Zealand, including batteries

Final orders 20 Nov 2026; final deliveries 18 Dec 2026

Warranty and technical support through an international call centre and online portal

SMA’s chief executive said the move reflected “a considered view of where the energy transition is heading”, according to RenewEconomy. SolarEdge told installers it is closing local operations, as reported by ESS News.

Both brands were common in Perth. With more than 40% of Perth homes now running solar, according to Cotality, a lot of local households are affected.

Does my inverter still work?

Yes. An inverter doesn’t need the company behind it to keep running. If yours is producing power with no error lights, leave it alone.

The change only matters when something breaks. Then you’ll need to know who to call and what your options are.

Is my warranty still valid?

Your manufacturer’s warranty should still stand, but making a claim may be harder.

  • SolarEdge says warranty and technical support will continue through its international call centre and online portal.
  • SMA hasn’t published local warranty details that we could verify. Check SMA’s Australian website, or ask the company that installed your system.

You also have rights that don’t depend on the manufacturer. Under Australian Consumer Law, the business that sold you a product is responsible for fixing problems with it. The ACCC says these consumer guarantees sit “over and above” any manufacturer’s warranty. A business must not simply tell you to go to the manufacturer instead.

What to do now

A few minutes now can save you a lot of hassle later.

  1. Find your paperwork. Look for your invoice, inverter model and serial number, and warranty documents. Our solar handover checklist shows what you should have.
  2. Note who installed it. If that company is still trading, they’re your first call under consumer law.
  3. Check your monitoring. Make sure you can still log in to your app. Note your normal daily output, so you’ll notice if it drops.
  4. Take photos. Snap the inverter’s label and screen. It makes a future claim much easier.
  5. Keep an eye on it. Perth summers are hard on electronics. Watch for error lights, odd noises or a sudden drop in output.
Enphase Micro Inverter Installed

What if my inverter fails?

Start with the business that sold it to you, then the manufacturer’s warranty line. If you’re out of warranty, or can’t get help, you have three main options.

Option

When it makes sense

Things to know

Repair

A small, fixable fault

Depends on finding parts and someone who can work on that brand

Replace the inverter only

A string system (like most SMA setups) with healthy panels

Usually the simplest fix. Check the new inverter suits your panels and roof

Replace more of the system

SolarEdge systems with optimisers on each panel, or older, smaller systems

SolarEdge optimisers are designed to work with SolarEdge inverters, so a swap may mean changing more parts

In WA, inverter work must be done by a licensed electrician. That’s a rule from Building and Energy, the State’s electrical safety regulator.

If you’re replacing parts anyway, it may be a good time to rethink the system. Our guide to microinverters vs string inverters explains the main choice. You can also read about whether a bigger inverter is better.

Planning a battery as well? See our guide to adding a battery to existing solar before you choose a new inverter. And if old gear is coming off the roof, here’s how to dispose of old solar panels in Perth.

Choosing a brand next time

These exits are a good reminder that support matters as much as specs. When you compare inverters, ask:

  • Does the brand have an Australian office and phone line?
  • How long has it been selling in Australia?
  • Who handles warranty claims: the brand, a local distributor or the installer?
  • Will your installer still be around to help in five or ten years?

Frequently asked questions

No. If it’s working, keep using it. Replace it only when it fails and can’t be repaired at a fair price.
SolarEdge says support continues through its international call centre and online portal. It hasn’t announced an end to monitoring in the reports we checked. Make sure you can log in, and save your system details just in case.
Start with the business that sold and installed it. Then try the manufacturer’s warranty line. If neither helps, a local solar electrician can check the system and talk you through repair or replacement.

Often, yes, but it depends on your setup. An AC-coupled battery can work alongside an existing inverter. Get your system checked first.

Get your system checked

Not sure where your system stands? Middle Swan Solar services and repairs solar systems across Perth, north and south of the river. We’ll check your inverter and tell you straight whether it needs anything at all.
Premium Solar Inverter